TM 5-3895-383-24
6.
Use a hoist to attach a lifting strap and Tool (A) to
vibratory pump (2) as shown. Remove two bolts (6) and
washers, then remove the vibratory pump from the
propel pump. The weight of the vibratory pump is 39 kg
(85 lb).
NOTE:
After the vibratory pump has been installed, fill
the hydraulic oil tank to the correct level. See the
Operation & Maintenance Manual for the correct
filling procedure.
NOTE:
For installation of the vibratory pump, reverse the
removal steps.
End By:
a.
lower operators platform or lower cab
14-27