TM 5-3895-379-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - CONTINUED
a. If oil is below low mark, oil
6. Engine Oil Pressure is Low (Warning Light
Turn engine off immediately.
level is low. Install engine oil
and Warning Horn On).
Open right-side door assembly
gauge rod (dipstick) in tube.
notify supervisor that engine
oil pressure was low (warning
light and warning horn on).
b. If oil is between marks, oil
level is correct. Fault is not
corrected. Install engine oil
gauge rod (dipstick) in tube,
close right-side door assembly
supervisor that engine oil
pressure is low (warning light
and warning horn on).
LOW MARK
HIGH MARK
ENGINE OIL
GAGE ROD
(DIPSTICK)
TUBE
401-086