TM 5-3895-383-24
Disassemble & Assemble Shift Valve
5479-017
Start By
a.
remove shift valve
1.
Make sure the shift valve is clean and free of dirt and
debris.
2.
Remove nut (3), and remove coil (2) from valve body
(1).
NOTE:
During assembly, tighten nut (3) to a torque of 4.1
N· m (3.0 lb-ft).
3.
Remove valve cartridge (4) from valve body (1).
NOTE:
During assembly, tighten valve cartridge (4) to a
torque of 20 N· m (27 lb-ft).
4.
Remove O-ring seals (5) and back-up ring (6) from
valve cartridge (4). Check the back-up ring and O-ring
seals for wear or damage and replace if necessary.
NOTE:
All valve components must be cleaned and
inspected before assembly. Lubricate all the
O-ring seals and back-up ring with clean hydraulic
oil during assembly. Assemble the valve with all
new seals.
NOTE:
For assembly of the shift valve, reverse the
disassembly steps.
End By:
a.
install shift valve
14-133
