TM 5-3895-383-24
Oscillating Hitch
SMCS Code: 4302; 7051; 7057; 7065; 7066; 7113
Part No.: 141-9864
Illustration 9
(1) Lubricate the O-ring slightly with the lubricant
which is being sealed.
(2) Diameter for the shaft of the articulation
joint .....................................69.85 ± .1 mm (2.8 ± 0.004 inch)
(3) Apply 9S-3263 Thread Lock Compound to the
thread of the bolts.
(4) Apply 9S-3263 Thread Lock Compound to the
thread of the bolts.
(5) Diameter for the horizontal
shaft ....................................69.85 ± .1 mm (2.8 ± 0.004 inch)
(6) Use the fittings to fill the cavities with 6R-3149
Grease. Remove the fittings and plug the holes.
(7) Apply 5P-3931 Anti-Seize Compound to the
face and the threads of the nut. Torque for
the nut ................................. 816 ± 136 N m (602 ± 100 lb-ft)
Stake the nut by bending the lockwasher tab into the slot on
the bearing nut.
(8)
Install the vertical shaft seals so that the lips of the seals
face upward. Install the horizontal shaft seals so that the
lips face forward. Lubricate the seal slightly with the
lubricant which is being sealed.
12-12
