TM 5-3895-383-24
Drum Group
SMCS Code: 6605
Part No.: 139-2035, 139-2036
Illustration 7
(1)
Apply 4C-9507 Retaining Compound to the bolt threads
at assembly.
(2)
Apply 6V-4876 Lubricant to splines. In the cavity of the
shaft, add 50 mL of 6V-4876 Lubricant. The "T"
symbols must be aligned vertically for proper shaft
alignment.
(3)
Apply 4C-9507 Retaining Compound to the bolt threads
at assembly.
(4)
Notched end for housing orientation.
(5)
Oil fill/drain plug.
(6)
Oil level plug.
(7)
Place the drum in the above position. This position is
required in order to fill the reservoir.
(8)
Apply 4C-9507 Retaining Compound to threads.
(9)
Plug for the drum cooling oil...................21 L (5.5 US gal)
Torque for the plug.............................. 90 15 Nm (66 11 lb-ft)
11-12
