TM 5-3895-383-24
Alternator
Disassemble & Assemble
Alternator
Start By:
a.
remove alternator.
1.
Remove the two screws and regulator (1).
2.
Disconnect capacitor lead (2) from the back of the
alternator. Remove the screw and capacitor (3).
3.
Remove the pulley nut, washer and pulley (4), fan (5),
and the key from the rotor shaft.
4.
Mark the front and rear frame assemblies for proper
assembly. Remove four screws (6) (one has a nut on it
on the back of the alternator).
5.
Separate the front frame and rotor assembly from the
rear frame and stator assembly. Watch for the wave
washer at the back of the rear frame to fall out.
6.
Remove four screws (7) and rotor (8) from the front
frame.
7.
Remove spacer (10) and front bearing (11), with a
suitable puller. Remove bearing cover (9) from the
rotor.
9-20
