TM 5-3895-383-24
(7)
Height of camshaft lobes.
To find lobe height, use the procedure that follows:
a.
Measure camshaft lobe height (8).
b.
Measure base circle (9).
c.
Subtract base circle (STEP B) from lobe height (STEP
A). The difference is actual lobe lift.
d.
Specified camshaft lobe lift (7) is:
7C4014 Camshaft Group
7C4016 Camshaft Group
(Identification on end of camshaft)
Exhaust lobe ........................................9.283 mm (.3655 in)
Intake lobe............................................9.283 mm (.3655 in)
Injector lobe..........................................9.733 mm (.3832 in)
6L4098 Camshaft Group
(Identification on end of camshaft)
Exhaust lobe ........................................7.459 mm (.2937 in)
Intake lobe............................................9.289 mm (.3657 in)
Injector lobe..........................................9.842 mm (.3875 in)
101-4538 Camshaft Group
(Identification on end of camshaft)
Exhaust lobe ........................................7.456 mm (.2935 in)
Intake lobe............................................9.264 mm (.3647 in)
Injector lobe....................................... 10.305 mm (.4057 in)
100-6300 Camshaft Group
(Identification on end of camshaft)
Exhaust lobe ........................................7.459 mm (.2937 in)
Intake lobe............................................9.264 mm (.3647 in)
Injector lobe....................................... 10.305 mm (.4057 in)
105-1544 Camshaft Group
115-4131 Camshaft Group
(Identification on end of camshaft)
Exhaust lobe ........................................7.456 mm (.2935 in)
Intake lobe............................................9.264 mm (.3647 in)
Injector lobe..........................................9.773 mm (.3848 in)
133-4984 Camshaft Group
(Identification on end of camshaft)
Exhaust lobe ........................................7.459 mm (.2937 in)
Intake lobe............................................9.264 mm (.3647 in)
Injector lobe.............................................733 mm (.3832 in)
5-15
