TM 5-3895-383-10
Safety Section
4-5
Safety Signs and Labels
Safety Section
Safety Signs and Labels
SMCS Code: 7000; 7405
There are several specific safety signs on your
machine. The exact location of the safety signs and the
description of the hazard are reviewed in this section.
Please take the time in order to become familiar with
the safety signs.
Make sure that you can read all of the safety signs.
Clean the safety signs or replace the safety signs if you
cannot read the words on the safety signs. Clean the
safety signs or replace the safety signs if you cannot
view the pictures on the safety signs.
If a safety sign is damaged or missing, the safety sign
must be replaced. If a safety sign cannot be read, the
safety sign must be replaced. If a safety sign is located
on a part that has been replaced, a new safety sign
must be placed on the new part. Consult your
Caterpillar dealer for new safety signs.
Do not operate this machine unless you have read
and understand the instructions and warnings in
the Operation and Maintenance Manual.
Failure to follow the instructions or heed the
warnings could result in injury or death.
Contact any Caterpillar dealer for replacement
manuals. Proper care is your responsibility.
Illustration 1
This safety sign is located on the operator console.
No clearance for a man in this area when the
machine turns. Severe Injury or death from
crushing could occur.
Install the steering frame lock pin into the locked
position before lifting the machine, transporting
the machine on another vehicle, or performing
service near the center of the machine.
Disengage the steering lock pin from articulation
joint and store in retainer before resuming
operation or the machine will not steer.
Illustration 2
This safety sign is located in the steer pivot on both
sides of the yoke.
