TM 5-3895-383-10
Safety Section
4-2
Important Safety Information
Important Safety Information
Most accidents involving product operation, maintenance and repair are caused by failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an
accident occurs. A person must be alert to potential hazards. This person should also have the necessary training,
skills and tools to perform these functions properly.
Improper operation, lubrication, maintenance or repair of this product can be dangerous and could result in
injury or death.
Do not operate or perform any lubrication, maintenance or repair on this product, until you have read and
understood the operation, lubrication, maintenance and repair information.
Safety precautions and warnings are provided in this manual and on the product. If these hazard warnings are not
heeded, bodily injury or death could occur to you or other persons.
The hazards are identified by the Safety Alert Symbol and followed by a Signal Word such as DANGER,
WARNING or CAUTION. The Safety Alert WARNING label is shown below.
The meaning of this safety alert symbol is as follows:
Attention! Become Alert! Your Safety is Involved.
The message that appears under the warning explains the hazard and can be either written or pictorially presented.
Operations that may cause product damage are identified by NOTICE labels on the product and in this publication.
Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. The warnings
in this publication and on the product are, therefore, not all inclusive. If a tool, procedure, work method or
operating technique not specifically recommended by Caterpillar is used, you must satisfy yourself that it is
safe for you and others. You should also ensure that the product will not be damaged or be made unsafe by
the operation, lubrication, maintenance or repair procedures you choose.
The information, specifications, and illustrations in this publication are on the basis of information available at the time
that the publication was written. The specifications, torques, pressures, measurements, adjustments, illustrations, and
other items can change at any time. These changes can affect the service given to the product. Obtain the complete
and most current information before you start any job. Caterpillar dealers have the most current information available.
For a list of the most current publication form numbers available, see the Service Manual Contents Microfiche,
REG1139F.
