TM 5-3895-382-24
Illustration 61
Stanadyne fuel injection pump.
(1) Engine stop solenoid
(2) 3 Amp wire
(3) 6 Amp wire
(4) Fuel injection pump
(5) Cold star advance unit
(6) 3 Amp wire
(7) Sending unit
(8) Start switch
Air Inlet And Exhaust System
SMCS Code: 1050
Accidental engine starting can cause injury or death to
personnel.
To prevent accidental engine starting, turn the ignition
switch to the OFF position, place a do not operate tag at
the ignition switch location and disconnect and tape the
electrical connection to the stop solenoid that is located
on the fuel injection pump.
Illustration 62
Cylinder and valve location for Type 1 engines and 9RM engines.
(A) Exhaust valves
(B) Inlet valves
Illustration 63
Cylinder and valve location for Type 2 engines and 7BJ engines.
(A) Exhaust valves
(B) Inlet valves
Valve Lash
Valve Lash Setting
The temperature of the engine does not change the valve lash
setting.
Valve Lash Setting
Inlet valve .......................................0.20 mm (0.008 inch)
Exhaust valve .................................0.45 mm (0.018 inch)
Valve Lash Adjustment
If the valve lash requires adjustment several times in a short
period of time, excessive wear exists in a different par of the
engine. Repair the problem in order to prevent more damage
to the engine.
6-70
