TM 5-3895-382-24
(30)
Tighten bolts (1) to 340 lb-ft (460 Nm).
(31)
Start engine and raise leveling blade (TM 5-3895-382-10).
(32)
Drive Roller with vibratory system operating on dirt surface for 30 to 60 minutes.
(33)
Lower leveling blade, apply parking brake and shut engine off (TM 5-3895-382-10).
(34)
Tighten eight locknuts (14 and 19) to 340 lb-ft (460 Nm).
(35)
Repeat steps (23) through (26) until locknuts retain tightness of 340 lb-ft (460 Nm).
b. Removal
(1)
Start engine and raise leveling blade (TM 5-3895-382-10).
(2)
Move Roller forward until joint where two pad-foot shell halves (10 and 13) meet is at 9:00 and 3:00 positions.
(3)
Lower leveling blade (TM 5-3895-382-10).
(4)
Set parking brake (TM 5-3895-382-10).
(5)
Shut engine off (TM 5-3895-382-10).
(6)
Remove twenty-four bolts (1), washers (2), and twelve scrapers (3) from bumper assembly (6).
(7)
Remove six bolts (18), locknuts (19), and twelve washers (17) from mounting holes of pad-foot shell halves (10
and 16). Discard locknuts.
2-54
