TM 5-3895-382-24
2-15. PAD-FOOT SHELL INSTALLATION/REMOVAL
This Task Covers:
a. Installation
b. Removal
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
Roller on level surface
(SC 5180-90-N26), Tool Number W33004,
Hole in drum at 12:00 position
NSN 5180-00-177-7033
Engine OFF
Shop Equipment, Automotive Maintenance and
Repair: OM Common No. 1, Less Power
Personnel Required
(SC 4910-95-A74), NSN 4910-00-754-0654,
Four
Tool No. W32593
Lifting Device (1,000 lbs [454 kg] capacity)
Materials/Parts
Wrench, Torque (0-600 lb-ft),
Locknuts (8)
NSN 5120-00-221-7983, (Included in
W32593)
a. Installation.
(1)
Remove twenty-four bolts (1), washers (2), twelve scrapers (3), four scraper plates (4), and two scraper plates (5)
from bumper assembly (6).
(2)
Remove two screws (7) and washers (8) and install four scraper plates (4) and two scraper plates (5) on mounting
posts (9).
(3)
Install two screws (7) and washers (8) in bumper assembly (6) to hold plates (4 and 5) in place.
2-50
