TM 5-3895-382-10
2-21
Table 2-1. Operator Preventive Maintenance Checks and Services – CONT.
Item
No.
Interval
Man-
hour
Item to be
Checked or
Serviced
Procedure
Equipment Not
Ready/Available if:
27 Before
0.1
Leveling
Blade
NOTE
Engine must be above low idle speed
to operate leveling blade.
a. Move the leveling blade control lever
backward to raise the blade.
b. Move the leveling blade control lever
to the center position to hold the blade
in position.
c. Move the leveling blade control lever
forward to lower the blade.
d. Move the leveling blade control lever
backward to raise the blade.
Leveling blade will
not raise.
Leveling blade will
not hold.
Leveling blade will
not lower.
28 Before
0.1
Propel Speed
Range Switch
a. Release parking brake.
b. Move propel lever forward and
backward and propel speed range
switch to low (tortoise) and the high
(hare) positions.
Propulsion system
does not operate or
change to low (tortoise)
and high (hare)
propulsion mode as
switch is moved, or
roller does not stop
when propel lever is in
STOP (center)
position.
