TM 5-3895-379-23
STEERING CONTROL UNIT (SCU) REPAIR - CONTINUED
0195 00
DISASSEMBLY - CONTINUED
17
15
16
18
14
21
NOTE
Components of the geroter assembly shown
in photo.
Geroter housing and geroter are not serviced
separately.
401-1124
20
19
7.
Remove seal (22). Discard seal.
22
8.
Remove spool (23) and sleeve (24) from control hous-
ing (25). Replace spool and sleeve if necessary.
23,24
401-1125
25
9.
Remove backup ring (26), O-ring (27) and O-ring (28)
27
23,24
(not shown), two bearing races (29) and needle thrust
bearing (30) from spool (23) and sleeve (24). Replace
26
bearing and races as an assembly, if necessary, and
discard back-up ring and O-rings.
401-1126
30
28
29
0195 00-4
