TM 5-3895-379-23
ROCKER ARM ASSEMBLY REPAIR - CONTINUED
0172 00
ASSEMBLY
NOTE
Make sure all oil holes in rocker shaft and in rocker levers are not clogged or plugged before beginning
assembly procedure.
When assembling, make sure bolt and oil supply connection are correctly positioned on rocker shaft.
Lubricate all components with clean engine oil before beginning assembly procedure.
1.
If removed, install oil supply connection (10) and bolt (9) on rocker shaft (4).
NOTE
Bushings may require reaming to fit. Ream new arm bushing to a clearance of 0.0024 +/- 0.0012 in
(0.06 +/- 0.03 mm).
2.
Install arm bushing (8) on rocker shaft (4).
NOTE
Install each of the components in the correct order onto rocker shaft.
Ensure bolts and connectors are correctly positioned on rocker shaft.
3.
Install remaining washers (7), springs (6), rocker shaft
6
235
7
1
brackets (5) and rocker arms (3) on rocker shaft (4).
4.
Install two new washers (2) and new retaining rings
(1) each end of rocker arm (3).
401-1758
9
10
8
4
5.
Install rocker shaft assembly (WP 0171 00).
END OF WORK PACKAGE
0172 00-2
