TM 5-3895-379-23
WATER SPRAY TUBES AND FITTINGS REPLACEMENT
THIS WORK PACKAGE COVERS
Type 1 Fitting Replacement, Type 2 Clamp Replacement, Water Lines Replacement
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
Tag, marker (Item 37, WP 0219 00)
Tool kit, general mechanic's (Item 36, WP 0220 00)
Shop equipment, common no. 1 (Item 28, WP 0220
Equipment Condition
Engine off (TM 5-3895-379-10)
Materials/Parts
Drums chocked (TM 5-3895-379-10)
Strap, tiedown (Item 36, WP 0219 00)
Water spray system drained (TM 5-3895-379-10)
TYPE 1 FITTING REPLACEMENT
NOTE
Type 1 fitting replacement is the same on angle fitting and straight fitting. Angle fitting shown.
Tag and mark each end of water line before removal.
Remove clamps and support brackets as required.
Remove cable ties as required.
1.
Remove nut (1) from fitting (2).
2.
Pull water line (3) from fitting (2).
NOTE
Tube may come off with line or stay with fit-
ting.
5
Perform step 4 only if tube stayed with fit-
ting.
1
3.
Cut water line (3) directly behind bushing (4) and dis-
card water line end, nut (1), bushing (4) and tube (5).
3
4.
Remove tube (5) from fitting (2).
2
4
401-786
