TM 5-3895-379-23
VIBRATORY BEARING RESERVOIR SERVICE - CONTINUED
0147 00
DRAIN - CONTINUED
WARNING
Oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause injury.
4.
Place container with 3 gal. (11.3 l) minimum capacity under plug (4).
5.
Remove plug (4) from vibratory reservoir (5).
6.
Allow oil to drain completely from vibratory reservoir (5).
.
1
5
4
2
3
401-735
CLEANING AND INSPECTION
1.
Clean plug.
2.
Clean area around plug openings.
3.
Inspect threads for crossed or peeled condition.
4.
Replace damaged plug.
FILL
1.
Install plug (4) in vibratory reservoir (5).
2.
Remove chocks from drums (TM 5-3895-379-10).
3.
Start engine (TM 5-3895-379-10).
4.
Move roller (1) until bar (2) is at bottom of drum (3).
5.
Turn off engine (TM 5-3895-379-10).
6.
Chock drums (TM 5-3895-379-10).
7.
Place container with of 3.1 gal. (12 l) minimum capacity under fill hole.
8.
Remove plug (4) from vibratory reservoir (5).
9.
Add oil (WP 0008 00 and WP 0009 00).
0147 00-2
