TM 5-3895-379-23
BRAKE CONTROL VALVE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
O-ring (7)
Packing, preformed (10)
Shop equipment, common no. 1 (Item 28, WP 0220
References
Materials/Parts
TM 5-3895-379-23P, Figures 84 and 85
TM 5-3895-379-10
Equipment Condition
WARNING
Oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause injury.
NOTE
Tag and mark all hoses and wires prior to removal.
Plug holes and cap fittings to prevent spilling oil.
Inspect all hoses, lines and fittings for cracks, bends, nicks, dents, stripped threads and cuts. Replace all
damaged parts.
Use container to catch any hydraulic oil that may drain from system. Dispose of oil IAW local policy
and ordinances. Ensure all spills are cleaned up.