TM 5-3895-379-23
INSTRUMENT WIRING HARNESS REPLACEMENT - CONTINUED
0112 00
INSTALLATION
NOTE
Install cable ties as required for installation of wiring harness assembly.
1.
Place instrument box assembly (4) on clean surface.
2.
Position instrument wiring harness assembly (15) in instrument box assembly (4).
NOTE
Perform steps 3 through 7 for CB534C Roller.
3.
Install washer (82), instrument wiring harness connector (91) and nut (90) to FPM meter (80).
4.
Install washer (89), instrument wiring harness connector (88) and nut (87) to FPM meter (80).
5.
Install washer (86), instrument wiring harness connector (85) and nut (84) to FPM meter (80).
6.
Install washer (83), instrument wiring harness connector (82) and nut (81) to FPM meter (80).
7.
Install lamp assembly (79) to FPM meter (80).
8.
Install three new lockwashers (75), wires (72), (73) and (74) and screws (71) on starter switch assembly terminals (76),
(77) and (78).
9.
Install three new lockwashers (67), wires (64), (65) and (66) and nuts (63) on fuel level indicator terminals (68), (69)
and (70).
10.
Install lamp assembly (61) on fuel level indicator (62).
69
65
64
63
73
63
68
67
69
66
70
67
62
61
401-611
0112 00-9