TM 5-3895-379-23
INSTRUMENT WIRING HARNESS REPLACEMENT - CONTINUED
0112 00
REMOVAL - CONTINUED
5.
Remove locknut (11), washer (12) and clamp (13) from operator station stud (14). Discard locknut.
NOTE
Tag and mark all wires prior to removal.
Remove cable ties as required for removal of wiring harness assembly.
6.
Remove clamp (13) from instrument wiring harness assembly (15).
7.
Disconnect connector (16) from connector (17).
8.
Disconnect connector (18) from connector (19).
9.
Disconnect connector (20) from connector (21).
10.
Disconnect connector (22) from connector (23).
11.
Disconnect connector (24) from connector (25).
12.
Carefully lift instrument box assembly (4) and instrument wiring harness assembly (15) from operator station (7) and
place on work bench.
15
14
4
13
24
12
22
11
20
21
16
25
18
17
23
19
7
401-603
0112 00-3
