TM 5-3895-379-23
ENGINE OIL PRESSURE SWITCH REPLACEMENT - CONTINUED
0085 00
REMOVAL
NOTE
Use container to catch any oil that may drain from system. Dispose oil IAW local policy and ordinances.
Ensure all spills are cleaned up.
NOTE
Cut cable ties as needed.
1.
Disconnect oil pressure switch connector (1) from
connector (2).
2.
Remove oil pressure switch (3) from elbow (4). Cap
elbow.
INSTALLATION
NOTE
Install cable ties as needed.
1.
Install engine oil pressure switch (3) on elbow (4) and
tighten to 15-18 lb-ft (20-25 Nm).
2.
Connect connector (2) to oil pressure switch connector
(1).
2
4
1
3
401-509
3.
Start engine and check for leaks (TM 5-3895-379-10).
4.
Close right-side door assembly (TM 5-3895-379-10).
5.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0085 00-2
