TM 5-3895-379-23
STARTING AID RESISTOR REPLACEMENT - CONTINUED
0087 00
REMOVAL - CONTINUED
4.
Remove two screws (6), washers (7) and starting aid resistor (8) from panel assembly (5).
NOTE
Tag and mark all wires prior to removal.
5.
Remove two locknuts (9), wires (10) and (11), lockwashers (12) and screws (13) from starting aid resistor (8). Discard
locknuts and lockwashers.
5
9
10
12
7
13
8
6
11
401-449
INSTALLATION
1.
Install two new lockwashers (12) and wires (10) and (11) on starting aid resistor (8) with two screws (13) and new lock-
nuts (9).
2.
Install starting aid resistor (8) on panel assembly (5) with two screws (6) and washers (7).
0087 00-2
