TM 5-3895-379-23
HOURMETER PRESSURE SWITCH REPLACEMENT - CONTINUED
0084 00
REMOVAL
NOTE
Cut cable ties as needed.
1.
Disconnect hourmeter pressure switch connector (1)
from connector (2).
2.
Remove hourmeter pressure switch (3) from tee (4).
Cap tee.
INSTALLATION
NOTE
Install cable ties as needed.
1.
Install hourmeter pressure switch (3) on tee (4) and
tighten to 15-18 lb-ft (20-25 Nm).
2.
Connect hourmeter pressure switch connector (1) to
connector (2).
1
4
3
2
401-508
3.
Start engine and check for leaks (TM 5-3895-379-10).
4.
Close right-side door assembly (TM 5-3895-379-10).
5.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0084 00-2
