TM 5-3895-379-23
STARTER REPLACEMENT - CONTINUED
0065 00
INSTALLATION
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure. Fail-
ure to follow this warning may cause injury.
CAUTION
26
26
Support weight of starter while wire is still
attached to starter. Do not allow wire to be
stretched or broken by weight of starter.
Allowing wire to stretch or break will
20
cause damage to equipment.
23
24
22
25
NOTE
18
Starter weighs 19 lb (8.6 kg).
17
1.
Install cable (26) on terminal (23) with new lock-
washer (25) and screw (24).
2.
Close cover (22) on terminal (23).
19
21
3.
Install starter (20) and cable (19) on flywheel housing
(21) with three washers (18) and screws (17). Tighten
401-438
screws to 33-47 lb-ft (45-64 Nm).
4.
Install wire (16) and cable (15) on terminal (12) with
11
washer (14) and nut (13). Tighten nut securely.
14
5.
Install rubber cover (11) on terminal (12).
13
15
16
12
401-437
0065 00-4