TM 5-3895-379-23
STARTER REPLACEMENT - CONTINUED
0066 00
REMOVAL - CONTINUED
8
5
3.
Position boot (7) so that end of cable (8) can be seen
and remove two nuts (9), washers (10) and two cables
from starter relay switch assembly (5).
10
7
1
10
9
401-442
INSTALLATION
NOTE
Install cable ties as needed.
1.
Install two cables (8) on starter relay switch assembly (5) with two washers (10) and nuts (9).
2.
Reposition boot (7) on end of cover cable (8).
3.
Install starter relay switch assembly (5) on frame assembly (6) with two washers (4) and screws (3).
4.
Connect starter relay switch assembly connector (1) to connector (2).
5.
Close right- and left-side door assemblies (TM 5-3895-379-10).
6.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0066 00-2
