TM 5-3895-379-23
THERMOSTAT HOUSING REPLACEMENT (CB534C) - CONTINUED
0056 00
INSTALLATION
1.
Install pipe plug (12) in thermostat housing assembly (4).
2.
Position new gasket (12) on thermostat housing assembly (4).
3.
Position hose (8) onto thermostat housing assembly (4).
4.
Install three bolts (10) and two bolts (9) in thermostat housing assembly (4). Tighten bolts to 33-47 lb-ft (45-64 Nm).
5.
Install clamp (7) on hose (8) and thermostat housing assembly (4). Tighten clamp until secure.
6.
Install clip (6) on thermostat housing assembly (4) with screw (5).
7.
Install temperature sensor (3) in thermostat housing assembly (4).
8.
Connect temperature sensor connector (2) to connector (1).
9.
Fill cooling system (WP 0052 00).
10.
Lower operator platform assembly (WP 0128 00).
11.
Start engine (TM 5-3895-379-10) and allow engine to idle until coolant reaches normal operating temperature. Run
engine five minutes. Check for leaks.
12.
Turn engine off (TM 5-3895-379-10).
END OF WORK PACKAGE
0056 00-3/(0056 00-4 Blank)
