TM 5-3895-379-23
RADIATOR HOSES REPLACEMENT - CONTINUED
0051 00
INSTALLATION
1.
Position two clamps (1) on hose (5).
2.
Position hose (5) on radiator (3) and water pump (6) and tighten two clamps (1).
3.
Position two clamps (1) on hose (2).
4.
Position hose (2) on radiator (3) and thermostat housing (4) and tighten two clamps (1).
1
2
1
4
6
1
5
3
1
401-412
5.
6.
Start engine (TM 5-3895-379-10) and allow engine to idle until coolant reaches normal operating temperature. Run
engine five minutes. Check for leaks.
7.
Turn engine off (TM 5-3895-379-10).
8.
Start engine and check for leaks (TM 5-3895-379-10).
9.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0051 00-2