TM 5-3895-379-23
COOLANT SYSTEM SERVICE - CONTINUED
0052 00
FILL
CAUTION
Do not fill coolant system with water only. Use a 50/50 mixture of ethylene glycol (antifreeze) and water.
Failure to do so will result in damage to engine.
1.
Pull lever (1) and open access door (2). Release lever.
2.
Remove radiator cap (3) from radiator (4) and fill radi-
2
ator with a 50/50 mixture of water and antifreeze. The
radiator is full when coolant level is 3 inches below
top of fill hose.
3.
Check radiator cap (3) for missing or damaged gasket.
Replace cap if gasket is damaged or missing.
3
4.
Install radiator cap (3) on radiator (4), pull lever (1)
4
and close access door (2). Release lever.
1
401-399
5.
Start engine (TM 5-3895-379-10) and allow engine to idle until coolant reaches normal operating temperature. Run
engine five minutes. Check for leaks.
6.
Turn engine off (TM 5-3895-379-10).
7.
Close right-side door assembly (TM 5-3895-379-10).
8.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0052 00-4
