TM 5-3895-379-23
FUEL FILTER ASSEMBLY MAINTENANCE - CONTINUED
0040 00
FUEL FILTER ASSEMBLY INSTALLATION - CONTINUED
7.
Ensure that drain valve (3) on bottom of filter element (4) is closed. If drain valve is open, close drain valve.
8.
If removed, install two new washers (20) and adapters (19) in fuel injection pump (21).
9.
Install two new bushings (16) and (17), two new bushings (18) and two tubes (14) and (15) in fuel filter assembly (7)
and on two adapters (19). Tighten two nuts (11) and (12) and two nuts (13).
10.
Slide clamp (10) up and tighten nut (9).
11.
For CB534B Roller, open fuel supply valves (1).
12.
For CB534C Roller, open fuel supply valves (2).
0040 00-10
