TM 5-3895-379-23
PRIMING FUEL SYSTEM - CONTINUED
0041 00
PRIMING
WARNING
Use caution and allow engine to cool before priming fuel system. Failure to follow this warning may cause
injury.
NOTE
Fuel lift pump is located above engine starter. To prime pump, reach up from under engine and around
starter.
If fuel system components have recently been serviced or replaced, perform step 2 while performing
step 1; otherwise, step 2 may be skipped.
Fuel system priming is performed the same way for CB534B and CB534C Rollers. CB534B Roller is
shown.
1.
Operate fuel lift pump handle (1) for approximately two minutes or until resistance is felt.
1
401-371
0041 00-2