TM 5-3895-379-23
ENGINE OIL SAMPLING VALVE AND FITTINGS REPLACEMENT - CONTINUED
0024 00
REMOVAL - CONTINUED
9.
Remove plug (11) from tee (7).
11
7
10.
Remove tee (7) and connector (12) from oil filter head
assembly (13).
12
11.
Remove connector (12) from tee (7).
13
401-277
INSTALLATION
1.
Apply sealing compound to threads of connector (12) and install connector and tee (7) to oil filter head assembly (13).
2.
Apply sealing compound to threads of plug (11) and install in tee (7).
3.
Apply sealing compound to threads of connector (9) and install in tee (7).
4.
Coat new O-ring (10) with oil and install on engine oil sampling valve (2).
NOTE
When installing engine oil sampling valve, position drain of valve downward to ease in collection of sample.
5.
Apply sealing compound to threads of engine oil sampling valve (2) and install on connector (9). Tighten locking nut
(8).
6.
Install hourmeter pressure switch (6) on tee (7) and tighten to 5-9 lb-ft (7-12 Nm).
7.
Connect hourmeter pressure switch connector (4) to connector (5).
8.
Install engine oil sampling valve drain cap (1) on engine oil sampling valve (2).
9.
Fill engine to capacity with engine oil (WP 0008 00 and WP 0009 00).
10.
Start engine and check for leaks (TM 5-3895-379-10).
END OF WORK PACKAGE
0024 00-3/(0024 00-4 Blank)
