TM 5-3895-379-23
FRONT ENGINE MOUNT REPLACEMENT - CONTINUED
0011 00
INSTALLATION - CONTINUED
WARNING
Do not place fingers between engine mount and frame assembly. Shifting engine may cause injury.
2.
Position two resilient mounts (20) between front engine mount (17) and frame assembly (18).
3.
Install two spacer sleeves (16) washers (14), bolts (15), washers (13) and nuts (12) in front engine mount (17) and frame
assembly (18). DO NOT tighten nuts.
WARNING
Use caution when handling heavy parts. Provide adequate support and assistance during procedure. Ensure
that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy parts sup-
ported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Engine weighs 2,000 lb (907 kg).
4.
With assistance, use a lifting device to lower engine (19).
5.
Tighten nuts (12) to 145-205 lb-ft (197-278 Nm).
6.
Remove lifting device from front engine bracket (11).
11
11
11
CB534C ROLLER
RIGHT ENGINE LIFTING BRACKET
401-242
CB534B ROLLER
RIGHT ENGINE LIFTING BRACKET
0011 00-5
