TM 5-3895-379-23-2
0265
REMOVAL - Continued
11.
On propel side of drum assembly (Figure 8, Item 6), remove eight bolts (Figure 8, Item 7) and washers
(Figure 8, Item 8) that fasten drum support (Figure 8, Item 1) to yoke (Figure 8, Item 3).
NOTE
The CB534B Roller model has shims between drum support (Figure 8, Item 1) and yoke
(Figure 8, Item 3) on vibratory side of drum assembly. Note the number of shims when
removing six bolts.
12.
On vibratory side of drum assembly (Figure 8, Item 6), remove six bolts (Figure 8, Item 5) and washers
(Figure 8, Item 4) that fasten drum support (Figure 8, Item 1) to yoke (Figure 8, Item 3). For the CB534B
Roller, remove shims (Figure 8, Item 2).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this
warning may cause injury or death.
NOTE
Weight of drum assembly is 4,750 lb (2,155 kg).
13.
Raise drum assembly (Figure 8, Item 6) until it is just off floor. Move drum assembly away from roller until it is
clear of yoke or frame. Place drum assembly on floor and chock drum.
0265-8
03/15/2011Rel(1.8)root(maintwp)wpno(M00203)
