TM 5-3895-379-23-2
0264
DRUM ASSEMBLY - Continued
4.
Install remaining 14 of 16 new locknuts (Figure 10, Item 14) and eight locks (Figure 10, Item 15) to housing
(Figure 10, Item 16). Bend tabs (Figure 10, Item 12) into position on eight locks (Figure 10, Item 13). Tighten
nuts to 276 27 lb-ft (374 37 Nm).
5.
Install six bolts (Figure 10, Item 17) and plate (Figure 10, Item 18) to eccentric assembly (Figure 10, Item 2).
6.
Install wheel clamp (Figure 10, Item 5) and key (Figure 10, Item 1) to eccentric assembly (Figure 10, Item 2).
7.
Install nut (Figure 10, Item 3) and washer (Figure 10, Item 4) to wheel clamp (Figure 10, Item 5).
NOTE
Apply sealing compound to four bolts and nine nuts.
8.
Install four bolts (Figure 10, Item 10), washers (Figure 10, Item 9), and drive shaft (Figure 10, Item 11).
9.
Install nine nuts (Figure 10, Item 8), washers (Figure 10, Item 7), and plate (Figure 10, Item 6) to drum assembly
(Figure 11, Item 14).
0264-18
03/15/2011Rel(1.8)root(maintwp)wpno(M00202)