• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 7. Drum Eccentric Assembly
Figure 8. Drum Eccentric Assembly

Technical Manual For Roller, Motorized, Vibrating Tandem Steel Drums - 2 Page Navigation
  242    243    244    245    246  247  248    249    250    251    252  
img
TM 5-3895-379-23-2
0264
ECCENTRIC ASSEMBLY - Continued
9.
Install four bolts (Figure 8, Item 2), washers (Figure 8, Item 3), cover (Figure 8, Item 4), and tapered bearing
(Figure 8, Item 5) to housing (Figure 8, Item 13).
10.
Install lifting brackets on housing (Figure 8, Item 13). Attach a lifting device to lifting brackets and move housing
(Figure 8, Item 13) to transmission stand.
11.
Install oil seal (Figure 8, Item 14) and sleeve (Figure 8, Item 17) to housing (Figure 8, Item 13).
12.
Install six bolts (Figure 8, Item 15), washers (Figure 8, Item 16), two new O-rings (Figure 8, Item 19), and two
pipes (Figure 8, Item 18) to housing (Figure 8, Item 13). Tighten bolts to a torque of 15 + 4 lb-ft (20 + 5 Nm).
NOTE
Apply retaining compound to six bolts.
13.
Use lifting device to position weight assembly (Figure 8, Item 22) on housing (Figure 8, Item 13).
14.
Install jam nuts (Figure 8, Item 10), locks (Figure 8, Item 11), and nuts (Figure 8, Item 12) to eight bolts
(Figure 8, Item 8) and bend tabs on locks (Figure 8, Item 9) into position.
NOTE
Apply retaining compound to four bolts.
15.
Install four bolts (Figure 8, Item 2), washers (Figure 8, Item 3), cover (Figure 8, Item 4), and tapered bearing
(Figure 8, Item 5) to housing (Figure 8, Item 6). Tighten bolts to a torque of 15 + 4 lb-ft (20 + 5 Nm).
16.
Install new O-ring (Figure 8, Item 1) to housing (Figure 8, Item 13).
17.
Install suitable link brackets on housing (Figure 8, Item 6). Attach a lifting device and install housing
(Figure 8, Item 6) to housing (Figure 8, Item 13).
18.
Remove link bracket from eccentric assembly (Figure 8, Item 7).
19.
Install three bolts (Figure 8, Item 20) and washers (Figure 8, Item 21) to housing (Figure 8, Items 6 and 13).
Tighten bolts to a torque of 15 + 4 lb-ft (20 + 5 Nm).
20.
Install link bracket on eccentric assembly (Figure 8, Item 7). Attach a lifting strap and lifting device to link bracket
and install housing (Figure 8, Item 6), with eccentric assembly (Figure 8, Item 7), to drum assembly
(Figure 9, Item 4).
0264-14
03/15/2011Rel(1.8)root(maintwp)wpno(M00202)


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.