TM 5-3895-379-23-2
0264
ECCENTRIC DISASSEMBLY - Continued
5.
Remove O-ring (Figure 5, Item 1) from housing (Figure 5, Item 13). Discard O-ring.
6.
Remove four bolts (Figure 5, Item 2), washer (Figure 5, Item 3), cover (Figure 5, Item 4), and tapered bearing
(Figure 5, Item 5) from housing (Figure 5, Item 6).
7.
Bend tabs on locks (Figure 5, Item 8) downward and remove jam nuts (Figure 5, Item 9), locks
(Figure 5, Item 10), and nuts (Figure 5, Item 11) that hold eight bolts (Figure 5, Item 12).
8.
Install positioning bolts to weight assembly (Figure 5, Item 22) and use lifting device to position weight assembly
(Figure 5, Item 22) on transmission stand.
9.
Remove six bolts (Figure 5, Item 15), washers (Figure 5, Item 16), and two pipes (Figure 5, Item 18) from
housing (Figure 5, Item 13). Remove two O-rings (Figure 5, Item 19) from two pipes. Discard O-ring.
10.
Remove oil seal (Figure 5, Item 14) and sleeve (Figure 5, Item 17) from housing (Figure 5, Item 13).
11.
Install lifting brackets on housing (Figure 5, Item 13). Attach a lifting device to lifting brackets and remove
housing (Figure 5, Item 13) from transmission stand.
12.
Remove four bolts (Figure 5, Item 2), washers (Figure 5, Item 3), cover (Figure 5, Item 4), and tapered bearing
(Figure 5, Item 5) from housing (Figure 5, Item 13).
0264-8
03/15/2011Rel(1.8)root(maintwp)wpno(M00202)