TM 5-3895-379-23-2
0264
DRUM DISASSEMBLY - Continued
6.
Remove nine nuts (Figure 2, Item 8), washers (Figure 2, Item 7), and plate (Figure 2, Item 6) from drum
assembly (Figure 1, Item 14).
7.
Remove four bolts (Figure 2, Item 10), washers (Figure 2, Item 9), and driveshaft (Figure 2, Item 11).
8.
Remove nut (Figure 2, Item 3) and washer (Figure 2, Item 4) from wheel clamp (Figure 2, Item 5).
9.
Use puller to remove wheel clamp (Figure 2, Item 5) and key (Figure 2, Item 1) from eccentric assembly
(Figure 2, Item 2).
10.
Remove six bolts (Figure 2, Item 17) and plate (Figure 2, Item 18) from eccentric assembly (Figure 2, Item 2).
NOTE
DO NOT remove two locknuts at location (X) at this time. Two nuts must remain to hold
eccentric assembly in place.
11.
Bend tabs (Figure 2, Item 12) down on eight locks (Figure 2, Item 13) and remove 14 of 16 locknuts
(Figure 2, Item 14) and eight locks (Figure 2, Item 15) from housing (Figure 2, Item 16). Discard locknuts.
0264-4
03/15/2011Rel(1.8)root(maintwp)wpno(M00202)