TM 5-3895-379-23-2
0263
INSTALLATION - Continued
NOTE
Plates (Figure 7, Item 11) apply to CB534C Roller.
3.
If removed, install four plates (Figure 7, Item 1) and plates (Figure 7, Item 7) on frame assembly
(Figure 7, Item 6) with eight washers (Figure 7, Item 5), bolts (Figure 7, Item 4), and nuts (Figure 7, Item 8).
1
4
11
5
1
6
2
7
10
8
9
3
M0199SWR
Figure 7. Drum Scraper Installation.
4.
Adjust spring and drum clearance to 1/2 in. (12 mm).
NOTE
Do not tighten nuts until final adjustment of scraper to drum. Refer to ADJUSTMENT for
proper scraper position.
5.
Install plate (Figure 8, Item 4) and plate (Figure 8, Item 2) on scraper (Figure 8, Item 3) with three bolts
(Figure 8, Item 1), washers (Figure 8, Item 6), and new locknuts (Figure 8, Item 5).
1
2
6
3
4
5
M0200SWR
Figure 8. Drum Scraper Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00201)