TM 5-3895-379-23-2
0226
DISASSEMBLY
1.
Remove two bolts (Figure 1, Item 11), lockwashers (Figure 1, Item 12), slide cover (Figure 1, Item 15), and
rod assembly (Figure 1, Item 10) partially out of cylinder assembly (Figure 1, Item 17). Discard lockwasher.
2.
Push head (Figure 1, Item 5) into cylinder assembly (Figure 1, Item 17) and remove lockwire ring
(Figure 1, Item 8).
3.
Push head (Figure 1, Item 5) and rod assembly (Figure 1, Item 10) from cylinder assembly (Figure 1, Item 17).
4.
Remove nut (Figure 1, Item 1), piston (Figure 1, Item 2), and head (Figure 1, Item 5) from rod assembly
(Figure 1, Item 10).
5.
Remove O-ring (Figure 1, Item 16) from rod assembly (Figure 1, Item 10). Discard O-ring.
6.
Remove wear ring (Figure 1, Item 4) and O-ring (Figure 1, Item 3) from piston (Figure 1, Item 2). Discard wear
ring and O-ring.
7.
Remove O-ring (Figure 1, Item 6) and back-up ring (Figure 1, Item 7) from outside of head (Figure 1, Item 5).
Discard O-ring and back-up ring.
8.
Remove lip-type seal (Figure 1, Item 9), O-ring (Figure 1, Item 14), and back-up ring (Figure 1, Item 13) from
inside head (Figure 1, Item 5). Discard lip-type seal, O-ring, and back-up ring.
6
7
4
3
9
1
2
5
8
11, 12
10
17
16
15
14
13
M0699SWR
Figure 1. Steering Cylinder Disassembly.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00164)