TM 5-3895-379-23-2
0225
REMOVAL - Continued
4.
Remove two screws (Figure 2, Item 1), washers (Figure 2, Item 3), and spacers (Figure 2, Item 4) from frame
assembly (Figure 2, Item 6) and yoke assembly (Figure 2, Item 9).
NOTE
The number of spacers used may vary from one roller to the next.
5.
Remove two pin assemblies (Figure 2, Item 5) and hydraulic steering cylinder (Figure 2, Item 7) from frame
assembly (Figure 2, Item 6) and yoke assembly (Figure 2, Item 9).
6.
Remove lubrication fitting (Figure 2, Item 2) from frame assembly (Figure 2, Item 6).
7.
Remove alignment bearing (Figure 2, Item 8) from yoke assembly (Figure 2, Item 9).
1
1
3
4
2
5
3
4
9
8
5
6
7
M0698SWR
Figure 2.
Hydraulic Steering Cylinders Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00163)
