TM 5-3895-379-23-2
0222
DISASSEMBLY - Continued
5.
Remove seal (Figure 4, Item 5) from gerotor housing (Figure 4, Item 4). Discard seal.
NOTE
Components of the gerotor assembly shown in photo.
Gerotor housing and gerotor are not serviced separately.
6.
Remove gerotor (Figure 4, Item 3), spacer (Figure 4, Item 7), drive (Figure 4, Item 8), and spacer plate
(Figure 4, Item 6) as a unit.
7
1
2
3
4
5
6
3
5
6
8
4
7
8
M1152SWR
Figure 4. Steering Control Unit (SCU) Disassembly.
7.
Remove seal (Figure 5, Item 7). Discard seal.
8.
Remove spool (Figure 5, Item 8) and sleeve (Figure 5, Item 9) from control housing (Figure 5, Item 9). Replace
spool and sleeve if necessary.
NOTE
Components of the gerotor assembly shown in photo.
9.
Remove backup ring (Figure 5, Item 10), O-ring (Figure 5, Item 11), and O-ring (Figure 5, Item 14) (not shown),
two bearing races (Figure 5, Item 13), and needle thrust bearing (Figure 5, Item 8) from spool
(Figure 5, Item 5) and sleeve (Figure 5, Item 6). Replace bearing and races as an assembly, if necessary,
and discard back-up ring and O-rings.
1
2
3
4
5, 6
7
2
5, 6
1
5, 6
9
3
4
8
8
M0665SWR
Figure 5. Steering Control Unit (SCU) Disassembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00160)
