TM 5-3895-379-23-1
0204
REMOVAL
WARNING
Oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause
injury.
CAUTION
Wipe area clean around all hydraulic connections to be opened during removal.
Cap oil lines and plug opening after removing lines. Contamination of hydraulic system
could result in premature failure.
NOTE
Use drain pan to catch any residual hydraulic oil that may drain from system. Dispose of oil
IAW local policy and ordinances. Ensure all spills are cleaned up.
1.
Disconnect five hose assemblies (Figure 1, Item 1) from rear propel motor (Figure 1, Item 2).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Failure to follow this warning may cause injury.
2.
Disconnect propel motor sensor (Figure 1, Item 5).
NOTE
Weight of rear propel motor is 40 lb (18 kg).
3.
Remove two bolts (Figure 1, Item 4), washers (Figure 1, Item 3), and remove rear propel motor
(Figure 1, Item 2). Discard washers.
0204-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00142)