TM 5-3895-379-23-1
0129
ELEMENT REMOVAL - Continued
NOTE
Place a drain pan beneath fuel/water separator to catch any fuel/water that may drain from
system. Dispose of fuel/water IAW local policy and ordinances. Ensure all spills are cleaned
up.
2.
Open drain valve (Figure 2, Item 5), loosen nut (Figure 2, Item 1), and drain fuel/water separator into drain
pan.
3.
Remove water separator bowl (Figure 2, Item 6) from fuel/water separator element (Figure 2, Item 4).
4.
Remove and discard washer (Figure 2, Item 7) from water separator bowl (Figure 2, Item 6).
5.
Remove ring (Figure 2, Item 8) from fuel/water separator head (Figure 2, Item 2).
CAUTION
Area around filter must be very clean. Any contaminants entering filter head will damage
equipment. Wipe area with cleaning cloth.
6.
Remove fuel/water separator element (Figure 2, Item 4) and seal (Figure 2, Item 3) from fuel/water separator
head (Figure 2, Item 2). Discard seal and element.
1
2
3
8
7
4
6
5
M0568SWR
Figure 2.
Fuel/Water Separator Element Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00067)