TM 5-3895-379-23-1
0077
FILL/FILTER INSTALLATION
1.
Clean the gasket mating surface of the oil filter assembly (Figure 3, Item 1). Ensure all of the old filter gasket
is removed.
NOTE
Refer to Lubrication Chart in (WP 0071) to determine correct grade of oil.
2.
Fill the oil filter (Figure 3, Item 3) with clean engine oil.
3.
Apply a light coating of clean engine oil to the seal (Figure 3, Item 2) of new oil filter (Figure 3, Item 3).
CAUTION
Tighten the oil filter element by hand only. Do not use a filter wrench to install the filter.
4.
Install new oil filter (Figure 3, Item 3) with seal (Figure 3, Item 2) on oil filter assembly (Figure 3, Item 1). When
the gasket contacts the oil filter assembly, tighten filter 3/4 turn more.
1
2
3
INSTALL
REMOVE
M1253SWR
Figure 3.
Engine Oil Filter Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00016)