TM 5-3895-379-10
WATER SPRAY NOZZLE CHECK AND SERVICE
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Equipment Condition
Materials/Parts
Engine off (WP 0005 00)
Brush, nylon (Item 2, WP 0029 00)
Roller parked on level ground (WP 0005 00)
Detergent (Item 5, WP 0029 00)
Drums chocked (WP 0005 00)
Rag, wiping (Item 16, WP 0029 00)
NOTE
The water spray system consists of two identical but separate systems located at each end of the roller.
Each system has seven nozzles on a spray bar.
All water spray nozzles are checked and serviced the same way. This work package covers one nozzle.
REMOVAL
1.
Remove cap (1) from clamp (2) by turning cap counterclockwise.
2.
Remove screen (3), seal (4) and nozzle (5) from cap (1).
2
4
3
5
1
REMOVE
INSTALL
401-120
