TM 5-3895-379-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - CONTINUED
1. Engine Cranks But Will Not Start or is Hard
b. If air cleaner primary element
to Start - Continued.
is torn, or ripped, notify
supervisor for replacement.
Install secondary and primary
filter elements and cover and
close two air cleaner housing
latches. Reset air filter service
indicator. Close left-side door
assembly (WP 0005 00).
c. If air cleaner secondary
element is clogged, notify
supervisor for replacement.
Install secondary and primary
filter elements and cover and
close two air cleaner housing
latches. Reset air filter
indicator. Close left-side door
assembly (WP 0005 00).
d. If air cleaner elements are not
clogged and fault is not
corrected,
install
filter
elements and cover and close
two air cleaner housing
latches. Close left-side door
assembly (WP 0005 00) and go
to Step 5.
a. If restrictions exist, remove
5. Check exhaust system exit (tail
restrictions.
pipe) for restrictions such as
mud or ice.
b. If no restrictions exist and
starting aid was used during
attempt to start, go to Step 6.
c. If no restrictions exist and
starting aid was not used
during attempt to start, go to
Step 6.
0010 00-4
