TM 5-3895-379-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - CONTINUED
1. Engine Cranks But Will Not Start or is Hard
to Start - Continued.
WARNING
DO NOT perform fuel system checks, inspections or main-
tenance while smoking or near fire, flames or sparks. Fuel
may ignite, causing injury, death or damage to roller.
Wear fuel-resistant gloves when handling fuels and
promptly wash exposed skin and change fuel-soaked cloth-
ing.
NOTE
Use a container to catch any fuel that may drain from sys-
tem. Dispose of fuel IAW local policy and ordinances.
Ensure that all spills are cleaned up.
a. If fuel tank is empty, fuel level
2. Remove padlock, fuel cap
gauge does not operate. Install
assembly and strainer and
strainer in tank and fill fuel
visually inspect tank for fuel
tank with fuel (WP 0015 00).
Notify supervisor that fuel
gauge does not operate.
b. If fuel tank contains fuel,
replace strainer, fuel cap
assembly and padlock and go
to Step 3.
STRAINER
REMOVE
FUEL CAP
ASSEMBLY
FUEL TANK
INSTALL
PADLOCK
401-083
0010 00-2
