TM 5-3895-379-10
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
INITIAL ADJUSTMENTS AND DAILY CHECKS - CONTINUED
5.
Operate Seat Belt.
WARNING
Use of seat belt while operating roller is mandatory. Fasten belt BEFORE driving. Trying to fasten belt while
driving creates a hazardous condition. Failure to follow this warning may result in injury or death.
a.
Fasten Seat Belt.
11
14
(1)
Sit on seat (5), hold gripper (11) and
15
extend seat belt (12) from retractor (13).
12
16
(2)
5
until securely latched.
13
b.
Unfasten Seat Belt.
(1)
(14) from buckle (15).
(2)
Allow seat belt (12) to slowly retract into
retractor (13).
401-037
.
6.
Adjust Operator Station Position.
WARNING
Do NOT operate roller with operator sta-
tion in unlocked position. Failure to follow
this warning may cause injury or death.
NOTE
When rolling operations require operator
to watch surfaces or edges of both drums,
such as side-to-side rolling, operator sta-
tion can be moved 90 degrees in either
direction. Holes are provided to lock
17
operator station in 45-degree or 90-degree
position.
a.
Pull lever (17) up and move operator station (18)
to desired position.
b.
Align bottom top of lever (17) with hole in oper-
18
ator platform (19).
19
c.
Release lever (17) to lock operator station (18) in
HOLE
401-038
position.
d.
Ensure that lever (17) is securely seated in hole
in operator platform (19).
0005 00-3