TM 5-3895-379-10
DESCRIPTION AND USE OF OPERATOR'S CONTROLS AND INDICATORS - CONTINUED
0004 00
CONTROLS AND INDICATORS - CONTINUED
49
LOCATED INSIDE
OPERATOR STATION
48
53
WHITE FILTER
INDICATOR
52
51
50
401-017
KEY
CONTROL OR INDICATOR
FUNCTION
48
Vibratory Bearing Oil Level Gauge
Vibratory bearing oil level for front and rear vibratory bearing
reservoirs can be checked with this sight gauge when drum is
positioned with welded rod at bottom of the drum.
49
Warning Horn
Sounds alarm during same time warning lights are illuminated.
50
Water Tank Drain Plug
Turn the tee handle and remove the drain plug to drain water from
the water tank. A drain plug is located on each of the water tanks.
51
Water Tank Shut-off Valve
Closes or opens the flow of water from the water tank to the water
spray screen during screen cleaning.
52
Hydraulic Oil Filter Indicator
Indicates amount of contamination collected inside hydraulic oil
filter. When white indicator reaches the red zone, filter needs to
be replaced.
53
Engine Oil Gauge Rod (Dipstick)
Indicates level of oil in crankcase of engine. Two marks are
provided to indicate acceptable high and low levels. When the oil
is below the low level, add oil to the engine.
END OF WORK PACKAGE
0004 00-11/(0004 00-12 Blank)
