1.1.1
End Plate
DETROIT DIESEL 53
3. On In-line engines, refer to Fig. 1 and install the
4. On a V-type engine, refer to Fig. 2 for the location
and install the 3/8 "-16 x 1 " bolts with lock washers.
3/8 "-16 x 7/8 " bolts with lock washers. Tighten the
bolts to 30-35 lb-ft torque.
Also install the two special washers and two 1/2 "-13 x
1-1/2 " bolts as shown when the fuel pump is driven
NOTE: On In-line engines built prior to engine
off the camshaft, or one special washer and bolt when
serial numbers 2D-903, 3D-011 and 4D-103, the
the fuel pump is driven by the accessory gear. Tighten
top center end plate attaching bolt was 3/8 "-16
the 3/8 "-16 bolts to 30-35 lb-ft torque and the 1/2 "-
x 3/4 ". Do not use a longer bolt at this
13 bolts to 71-75 lb-ft torque.
location on engines built prior to the above
engine serial numbers.
Page 2
